Simulate the I2C protocol with single-chip I/O port I2C IO was used to simulate program online example is 51, the accuracy of any of the sample without doubt. But if directly to it based on AVR is changed, it is a not careful, will have a little problem. It shall be from the I2C hardware specification and AVR and 51 MCU IO mouths speak up. The I2C require SCL, SDA has function of line and second line, namely the I2C driver mouth should be drain open circuit, the maintenance of its high level is accomplished by pull-up resistors, low level requires strong drive at the mouth of the drop-down. 51 microcontroller IO port completely accords with the feature. Just write the I2C driver is handy. But the AVR IO mouth is powerful, it outputs high level is real high level, rather than rely on what pull-up resistor to provide, only 10 ma is less than the current! So if use PORTB_Bit0 = 1 such operations directly, cannot satisfy the I2C line and function, if there are other devices to pull SCL or SDA is low, so the result is two IO mouth fighting, who is winning is unknown, time grew, mostly both; chip fever. Of course, the IO port of AVR naturally has the means to satisfy the electrical characteristics of I2C, not just can't output 1, so it can be used with its high impedance status (DDRB_Bit0=0,PORTB_Bit0= 0), to output 0 (DDRB_Bit0=1,PORTB_Bit0=0).

Packet : 109201273i2cfm3130.rar filelist
I2CFM3130\FM3130.c
I2CFM3130\FM3130.dep
I2CFM3130\FM3130.ewd
I2CFM3130\FM3130.ewp
I2CFM3130\FM3130.eww
I2CFM3130\FM3130_dbg.aps
I2CFM3130\settings\FM3130.dbgdt
I2CFM3130\settings\FM3130.dni
I2CFM3130\settings\FM3130.wsdt
I2CFM3130\Debug
I2CFM3130\settings
I2CFM3130
I2CFM3130\FM3130_cn_ds.pdf
I2CFM3130\i2c总线.doc
I2CFM3130\i2c总线协议(中文版).pdf

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．